1. Turn on Parrot Skycontroller 2 by pushing the transparent button. Parrot Skycontroller 2 is already paired with Parrot Bluegrass.
  2. Place the smart device holder on Parrot Skycontroller 2 and place the smart device in it.
  3. Connect the USB cable of your smart device from Parrot Skycontroller 2 to your smart device.
  4. Turn on/off Parrot Bluegrass by pressing the LED button
  5. The Parrot Skycontroller 2 button is green when it is connected. If the button is blue, it means that the drone does not have a GPS signal. Stand in a clear, open space to pick up a signal.
  6. Parrot Sequoia multispectral LED must be green.
  7. Launch Pix4DFields.
  8. Press  button 




10. Select New Capture Path


11. Select APPLY

12. Press CHECK

 13. A drone take-off checklist will appear:

Notifications are noted in orange.

-          “Camera firmware version: New firmware update available”

-          “Drone firmware version: New drone firmware update available”

-          “Controller firmware version: New controller firmware update available”

14. Press on yellow lines, you will be directed to an Update window.


Update Parrot Sequoia

Now select “Camera firmware version :  New camera firmware update available”

On Sequoia line, press “Install 1.7.1”, then update process will start: 

Update in progress

Sequoia is rebooting

Please wait until end of update process.


Update Parrot Bluegrass

1-      On Bluegrass line, press Install 4.6.3 to start update process



Update is progress

Bluegrass is rebooting


Update Parrot Skycontroller 2

1-      Select Download 1.0.5 on “Skycontroller 2P” line

Update is progress

Skycontroller 2 is rebooting




Have more questions? Submit a request